Here’s a guide on resetting error codes on smart lawn mower displays, based on general troubleshooting principles for remote-controlled mowers:
Steps to Reset Error Codes
Power Cycle the Mower
Turn off the mower and disconnect the battery.
Wait 2–3 minutes before reconnecting the battery and restarting.
Check the Display Menu
Nigate to Settings > Error Log (or similar).
Select Clear Errors or Reset Codes.
Manual Reset via Buttons
Some models require holding specific buttons (e.g., Power + Mode for 5 seconds).
Factory Reset (if persistent)
Access Advanced Settings > Factory Reset (note: this erases all custom configurations).
Common Error Codes and Solutions
| Error Code | Possible Cause | Reset Method |
|---|---|---|
| E01 | Blade obstruction | Clear debris, restart |
| E02 | Low battery | Recharge, reset via menu |
| E03 | Motor overheating | Cool down, power cycle |
| E04 | Communication failure | Check remote pairing, reset |
| E05 | Sensor malfunction | Factory reset if unresolved |
Additional Tips
Consult the user manual for model-specific reset procedures.
Update the mower’s firmware if errors recur.
Let me know if you need further details!