How to Replace Worn-Out Tires on a Self-Propelled Lawn Mower-Company new-Lawn Mower

Here’s a step-by-step guide to replacing worn-out tires on a self-propelled lawn mower, based on the search results.

Tool	Purpose
Socket wrench	Loosen/tighten bolts
Jack or jack stands	Lift the mower safely
Pliers	Remove debris or stubborn parts
Replacement tires	Ensure compatibility with mower model
Torque wrench	Tighten bolts to manufacturer specs
Lubricant (e.g., grease)	Prevent rust on axles
Safety glasses and gloves	Protect during the process

Safety First

Disconnect the spark plug to prevent accidental starts.

Work on a level surface and wear protective gear.

Loosen Lug Nuts

Use a socket wrench to loosen (but not remove) the nuts while the mower is on the ground.

Lift the Mower

Place a jack under the mower frame and raise it until the tire is off the ground. Secure with jack stands.

Remove the Old Tire

Fully unscrew the lug nuts and pull the tire off the axle. Clean the axle if rusted.

Install the New Tire

Align the new tire with the hub and push it onto the axle. Hand-tighten the lug nuts initially.

Tighten Lug Nuts Properly

Lower the mower slightly until the tire touches the ground. Use a torque wrench to tighten nuts in a crisscross pattern for even pressure.

Final Check

Reconnect the spark plug and test the mower’s movement. Ensure no wobbling or instability.

Check tire pressure regularly to oid uneven wear.

Inspect tires for cracks or bulges before each use.

Lubricate axles annually to prevent seizing.

For punctures, oid temporary fixes like Fix-a-Flat; opt for a tire plug kit or professional repair.

Let me know if you need further details!